About Me

AD

SP Flash Tool All in One Latest Collection 2019

SP Flash Tool

SP Flash Tool All in One Latest Collection 2019: SP flash tool is a small but very powerful application that allows you to easily update any of your media tech mobile. with its update firmware, can recover it, format it, but use it Only Android which is MTK based. smart Phone Flash Tool is a cross platform application that could download built images and binary data to MediaTek smart phone chips. Now it supports Win 7, Win Xp 32bit and Ubuntu 10.4. You can Download SP Flash Tool Latest version from Below downloading section.

SP Flash Tool Features :

  • FORMAT
  • DOWNLOAD
  • READBACK
  • MEMORY TEST
  • PARAMETER

Memory Test

Smart phone Flash tool offers this feature for Users to test and verify the external memory Device RAM and NAND flash.

For memory validation and testing, Smart Phone Flash Tool offers a Memory Test for users to test and verify the external memory devices RAM, eMMC and NAND flash.  In the test mode, the DA is downloaded into the target’s internal SRAM to check the handset’s memory devices. Smart Phone Flash Tool will parse the memory deceive configuration information from the Pre-Loader.

1. Switch to Memory Test

 To enter the Test Mode, select the “Memory Test” page.

 2. Select Memory Test Methods

For external RAM testing, we provide four test methods: Data Bus Test, Address Bus Test, Decided Pattern Test, Inc/Dec Pattern Test; For the NAND or eMMC flash test, we provide a test method, Decided Pattern Test. You can choose the test scenarios from the left check-boxes.

 3. Power off target

A handshake must be performed between Smart Phone Flash Tool and the target mobile phone, thus the target must initially be powered off, and connected to the PC via a download cable.
For USB download, please pull out both Cable and Battery.

4. Select DA

Please make sure the Download Agent has been assigned.

5. Select Scatter File

Please make sure correct scatter file has been assigned.

6. Configure Options

Open “Option Dialog” to select the expected options for download method, power supply and speed switch mode.

7. Start Memory Test

Press “Start” button in Memory Test page to start downloading image.

8. Power on target

Power on the target and the format procedure will begin.

9. Stop Memory Test

Note that to interrupt the format process at any time, press the stop button or f10.

SP Flash Tool

Format:

This feature allows users to format phone NAND, EMMC or SDMMC flash.

Format Options

Flash Tool provides Auto Format and Manual Format for users.

1. Auto Format

If “Auto Format Flash” is selected, the format range is according to the target NAN flash information reported by DA; No further information is required from user input.

↦  Format whole flash

The flag will notify SP Flash Tool to format whole NAND flash.

↦Format whole flash except Bootloader

The flag will notify SP Flash Tool to format whole NAND flash except BootLoader (Pre-Loader & DSP_BL).
Note: The calibration data will be erased during “Format whole flash” operation.

2. Manual Format

By selecting “Manual Format Nand Flash”, the flash is formatted according to the specified range.
Note: NVRAM calibration data may be erased during this format operation.

➤Format Step

1. Power off target
A handshake must be performed between Smart Phone Flash Tool and the target mobile phone, thus the target must initially be powered off, and connected to the PC via a download cable.
For USB download, please pull out both Cable and Battery.

2. Select DA
Please make sure the Download Agent has been assigned.

3.Select Scatter File
Please make sure correct scatter file has been assigned.

4.Configure Options
Open “Option Dialog” to select the expected options for download method, power supply and speed switch mode.

5.Start Format
Press “Start” button in format page to start downloading image

6.Power on target
Power on the target and the format procedure will begin.

7.Stop Format
Note that to interrupt the format process at any time, press the STOP button or F10.

Parameter Setting

This feature allows user to set some parameter of phone, such as OTP parameter and so on.

 Flash tool provide read and write functions for data in OTP (One Time Programming) area.

 Open Parameter Page

Click “Window”->”Parameter Page” or Ctrl + P to open Parameter Page.
Read OTP steps

1. Power off target

A handshake must be performed between Smart Phone Flash Tool and the target mobile phone, thus the target must initially be powered off, and connected to the PC via a download cable.
For USB download, please pull out both Cable and Battery.

2. Configure Options

Check “OTP” to enable “Parameter of OTP”.

Select “Read” and pressing “Setting” to open “OTP Read Setting” Dialog.
In the dialog, read address, read length and file path to save the OTP data can be configured.
After pressing “OK”, OTP read settings will be shown on the parameter page.

3. Start Read OTP

Press “Update” button in Parameter page to start read OTP data.

4. Power on target

Power on the target and the read OTP procedure will begin.

5. Stop read OTP

Note:- that to interrupt the read OTP process at any time, press the STOP button or F10.

1. Power off target

A handshake must be performed between Smart Phone Flash Tool and the target mobile phone, thus the target must initially be powered off, and connected to the PC via a download cable.
For USB download, please pull out both Cable and Battery.

2. Configure Options

Check “OTP” to enable “Parameter of OTP”.

Select “Write” and pressing “Setting” to open “OTP Write Setting” Dialog. In the dialog, OTP operation, write address, Write length and file path of the file contains OTP data can be configured.

After pressing “OK”, the write settings will be shown on the parameter page.

3. Start Format

Press “Update” button in Parameter page to start write OTP data.

4. Power on target

Power on the target and the Write OTP procedure will begin.

5. Stop read OTP

Note that to interrupt the Write OTP process at any time, press the STOP button or F10.

 Readback

This feature allows customer to read a length of Memory from phone.

➤Readback Options

1.Assign Readback Files

Click the”Add” button to add a read back file, and “Remove” button will remove the selected item.

2. Configure Readback Options

Double click the readback item to assign expected file path and name.  After click “Save” button, following options should be configured.
➤Select Read Flag (Only for NAND Flash)
⏩  Read Page + Spare: To read NAND flash page and spare raw data including bad blocks;
⏩  Read Page Only: To read NAND flash page raw data including bad blocks;
⏩  Read Spare Only: To read NAND flash spare raw data including bad blocks;
⏩ Read Page with ECC: To read NAND flash good block page data with ECC 1-bit correction mechanism

➤ Configure Address Type
⏩ Hex: value is used immediately.
⏩ Decimal: value is automatically converted into hexadecimal in the main application window.

➤ Configure Start Address and Length
⏩ NOTE: The length must be an integer multiple of 4096.

Readback Step

➤ Power off target
A handshake must be performed between Smart Phone Flash Tool and the target mobile phone, thus the target must initially be powered off, and connected to the PC via a download cable.
For USB download, please pull out both Cable and Battery.

⏩Select DA
Please make sure the Download Agent has been assigned.

⏩ Select Scatter File
Please make sure correct scatter file has been assigned.

⏩Assign readback file
Add readback items by pressing “Add” button.

⏩ Configure Options
Double click the readback item to configure file path, file name, address type, read flag,  start address and length.
     
⏩Start Readback
Press “Readback” button to start downloading image.

⏩ Power on target
Power on the target and the readback procedure will begin.

⏩Stop Readback

Note that to interrupt the readback process at any time, press the STOP button or F10.

SP Flash Tool All in One Latest Collection 2019

File type: compressed/Zip
[Use 7 zip or Win rar To Unzip File]
File Size: 270 MB
File Pass Word: NO
CLICK HERE...

:Also Read This And Download : 




Post a Comment

0 Comments